All Activity

Package Includes:

• 75T DMA Board
• 6th Generation Fuser HDMI
• KMbox Net/ Makcu
• 1:1 cfg Basic Firmware for EAC/BE
• USB-C 3.2 Gen 2 to USB-A Cable

Key Features:

Effortless Updates

• The 2-in-1 USB-C port streamlines updates by handling both data and JTAG operations, eliminating the need for re-flashing.

Lightning-Fast Data Transfer

• Equipped with USB 3.2 Gen 2 technology, enjoy data transfer speeds of up to 200 MB/s.
• Powered by the FT601 USB3.2 Gen 2 to FIFO interface bridge chip, delivering up to 5Gbps bandwidth for optimal performance.

Advanced FPGA Technology

• Built with the Xilinx 7 Series Artix-7 75T FPGA, offering:
  • High performance-per-watt efficiency.
  • Superior transceiver line rates.
  • Enhanced DSP processing capabilities.
  • Refined AMS (Analog Mixed Signal) integration.
• Ideal for applications demanding higher logic density and advanced processing power.

USB-C JTAG Flashing

• On-board JTAG allows easy flashing of the DMA board via the USB-C Update Port, eliminating the need for cumbersome JTAG cables.

Stay Cool Under Pressure

• Comes with a built-in heat sink, ensuring the FPGA remains cool, preventing thermal throttling and extending the card's longevity.

User-Friendly Design

• On/Off Switch: Conveniently deactivate the card without physically disconnecting it from your PC.
• PCILeech Compatible: Features 64-bit memory access, PCIe TLP access, and compatibility with PCILeech for reading/writing to target system memory. (Note: Custom firmware is not included.)

Performance Highlights:

• USB-C 3.2 Gen 2 Connection: Seamless data transfer with speeds up to 300 MB/s read/write.
• DMA Reliability: Backed by a 3-month warranty covering defects in materials or workmanship under normal use and maintenance.
• DMA Firmware warrenty : Backed by a 7 - days testing warranty on Firmware.

Warranty Details:

• During the 1-month warranty period,  DMA BOARD  will repair or replace defective products or components at no charge.

Package Includes:

• 75T DMA Board
• 6th Generation Fuser HDMI
• KMbox Net/ Makcu
• 1:1 cfg Basic Firmware for EAC/BE
• USB-C 3.2 Gen 2 to USB-A Cable

Key Features:

Effortless Updates

• The 2-in-1 USB-C port streamlines updates by handling both data and JTAG operations, eliminating the need for re-flashing.

Lightning-Fast Data Transfer

• Equipped with USB 3.2 Gen 2 technology, enjoy data transfer speeds of up to 200 MB/s.
• Powered by the FT601 USB3.2 Gen 2 to FIFO interface bridge chip, delivering up to 5Gbps bandwidth for optimal performance.

Advanced FPGA Technology

• Built with the Xilinx 7 Series Artix-7 75T FPGA, offering:
  • High performance-per-watt efficiency.
  • Superior transceiver line rates.
  • Enhanced DSP processing capabilities.
  • Refined AMS (Analog Mixed Signal) integration.
• Ideal for applications demanding higher logic density and advanced processing power.

USB-C JTAG Flashing

• On-board JTAG allows easy flashing of the DMA board via the USB-C Update Port, eliminating the need for cumbersome JTAG cables.

Stay Cool Under Pressure

• Comes with a built-in heat sink, ensuring the FPGA remains cool, preventing thermal throttling and extending the card's longevity.

User-Friendly Design

• On/Off Switch: Conveniently deactivate the card without physically disconnecting it from your PC.
• PCILeech Compatible: Features 64-bit memory access, PCIe TLP access, and compatibility with PCILeech for reading/writing to target system memory. (Note: Custom firmware is not included.)

Performance Highlights:

• USB-C 3.2 Gen 2 Connection: Seamless data transfer with speeds up to 300 MB/s read/write.
• DMA Reliability: Backed by a 3-month warranty covering defects in materials or workmanship under normal use and maintenance.
• DMA Firmware warrenty : Backed by a 7 - days testing warranty on Firmware.

Warranty Details:

• During the 1-month warranty period,  DMA BOARD  will repair or replace defective products or components at no charge.

Emulation Firmware. (1:1 Full CFG & BAR support.)
Supported Anti-Cheats: VGK, EAC, BE, ACE Ricochet and lower tier ACs.
Undetected on all mentioned Anti-Cheats.

1 month replacement warrenty

Emulation Firmware. (1:1 Full CFG & BAR support.)

Supported Anti-Cheats: EAC, BE.
Undetected on all mentioned Anti-Cheats.

*Some GIGABYTE Motherboards cant be supported, 

1 month Warrenty

Package Includes:

• 75T DMA Board
• 6th Generation Fuser HDMI
• KMbox Net/ Makcu
• 1:1 cfg Basic Firmware for EAC/BE
• USB-C 3.2 Gen 2 to USB-A Cable

Key Features:

Effortless Updates

• The 2-in-1 USB-C port streamlines updates by handling both data and JTAG operations, eliminating the need for re-flashing.

Lightning-Fast Data Transfer

• Equipped with USB 3.2 Gen 2 technology, enjoy data transfer speeds of up to 200 MB/s.
• Powered by the FT601 USB3.2 Gen 2 to FIFO interface bridge chip, delivering up to 5Gbps bandwidth for optimal performance.

Advanced FPGA Technology

• Built with the Xilinx 7 Series Artix-7 75T FPGA, offering:
  • High performance-per-watt efficiency.
  • Superior transceiver line rates.
  • Enhanced DSP processing capabilities.
  • Refined AMS (Analog Mixed Signal) integration.
• Ideal for applications demanding higher logic density and advanced processing power.

USB-C JTAG Flashing

• On-board JTAG allows easy flashing of the DMA board via the USB-C Update Port, eliminating the need for cumbersome JTAG cables.

Stay Cool Under Pressure

• Comes with a built-in heat sink, ensuring the FPGA remains cool, preventing thermal throttling and extending the card's longevity.

User-Friendly Design

• On/Off Switch: Conveniently deactivate the card without physically disconnecting it from your PC.
• PCILeech Compatible: Features 64-bit memory access, PCIe TLP access, and compatibility with PCILeech for reading/writing to target system memory. (Note: Custom firmware is not included.)

Performance Highlights:

• USB-C 3.2 Gen 2 Connection: Seamless data transfer with speeds up to 300 MB/s read/write.
• DMA Reliability: Backed by a 3-month warranty covering defects in materials or workmanship under normal use and maintenance.
• DMA Firmware warrenty : Backed by a 7 - days testing warranty on Firmware.

Warranty Details:

• During the 1-month warranty period,  DMA BOARD  will repair or replace defective products or components at no charge.

Key Features

• Resolution and Refresh Rate Support:

  • Maximum: 3840x2160P at 60Hz
  • Backward Compatibility:
    • 2560x1440P at 144Hz
    • 1920x1080P at 240Hz
    • 3440x1440P at 100Hz
    • 2560x1080P at 200Hz
  • Wide compatibility with other resolutions and refresh rates.

• Plug-and-Play Simplicity:

  • No complex settings or adjustments required.
  • Lower latency than streaming and no lags during operation.

• Enhanced Perspective:

  • Works seamlessly with DMA to assist in achieving advanced visual perspectives without sacrificing frame rates.

• Durable and Reliable:

  • Shipped directly from the original factory.
  • Comes with a warranty card for peace of mind.

Best Pairing with DMA Cards

The Fusion works exceptionally well with DMA, a high-performance DMA solution introduced by Captain Corporation. Featuring XILINX FPGAs like the 35T and 75T chips, DMA offers:

• Stable and efficient data transfer.
• Compatibility with Fuser for optimal DMA acceleration.

This combination ensures high-performance results for data-intensive tasks such as network communication and graphic processing.

Shipping Information

• Ships will be process within 1-3 business days  international delivery.

Setup Guide

Wiring Instructions:

1. Connect three HDMI transmission lines to:
   • Game Console
   • Radar Machine
   • Fusion Device

Secondary Machine Requirements:

• Processor: Intel i5 or equivalent
• RAM: 4GB
• Graphics Card: Not required; integrated graphics supported
• Performance: Minimum 4000 points

Interface Details:

• HDMI Output: Main display connection.
• HDMI1 Host: Connect to the host GPU.
• HDMI2 Secondary: Connect to the secondary machine GPU.
• Type-C Port: For program updates and EDID injection (used only during upgrades).
• DC 12V Port: Default 12V 2A power supply.

Important Note:
Do not directly connect the host GPU to the main monitor using a DP or HDMI cable. If connected, it must be unplugged.

Indicators and Buttons

Indicators:

• D1: Power Indicator (Always on when powered).
• D2: Fusion Function Indicator (On/Off).
• H2: HDMI2 Input Signal Indicator (On: Normal; Off: No signal).
• H1: HDMI1 Input Signal Indicator (On: Normal; Off: No signal).

Button Functions:

• Power Button: Turns the device on/off.
• K1 Button:
  • Short press: Cycle through resolutions:
    • 1920x1080
    • 2560x1440
    • 3840x2160
    • 2560x1080
    • 3440x1440
  • Long press (3 seconds): Display current resolution and refresh rate in the upper-left corner.
• K2 Button: Adjust upper-layer image matting intensity (21 levels from 0 to 20, default is 0).
• K3 Button: Reset matting strength to factory default (0).
• K4 Button: Toggle fusion function.

Troubleshooting Fusion Function:

1. Set the background color of the secondary unit to pure black.
2. Press the K2 button to enhance RGB values.

Additional Features:

• Plug-and-play operation.
• Automatic standby and memory storage.
• Temperature-controlled cooling for optimal performance.
• Original picture output with extremely low latency.

Important Upgrade Note:
If compatibility issues persist, upgrading via EDID injection may be required. Use the Type-C port to add an EDID and resolve compatibility problems.

Emulation Firmware. (1:1 Full CFG & BAR support.)
Supported Anti-Cheats: VGK, EAC, BE, ACE Ricochet and lower tier ACs.
Undetected on all mentioned Anti-Cheats.

1 month replacement warrenty

Emulation Firmware. (1:1 Full CFG & BAR support.)
Supported Anti-Cheats: VGK, EAC, BE, ACE Ricochet and lower tier ACs.
Undetected on all mentioned Anti-Cheats.

*Some GIGABYTE Motherboards cant be supported, So check your Motherboard before Purchase, There will be No refund.

1 month replacement warrenty

Emulation Firmware. (1:1 Full CFG & BAR support.)

Supported Anti-Cheats: EAC, BE.
Undetected on all mentioned Anti-Cheats.

*Some GIGABYTE Motherboards cant be supported, So check your Motherboard before Purchase, There will be No refund.

Due to Limited Stock All dma card Shipment will be done from 7th or 8th july we will try to make it faster

75T Stander DMA CARD

Makcu: Freedom, Power, and Precision in One Package

Open Source & Community-Driven
Makcu is fully open source, inviting developers and users alike to contribute, customize, and innovate together. It's built by the community, for the community.

Tailored Emulation
Makcu doesn’t just work—it adapts. With the ability to emulate your specific device setup, it ensures a personalized and flexible experience every time.

No Hardware Restrictions
Enjoy total control. Makcu places no limitations on your hardware, giving you the freedom to experiment and expand without constraints.

Built on ESP32-S3
Powered by the proven ESP32-S3 chip, Makcu delivers dependable performance and is built for long-term use in both hobbyist and professional projects.

Blazing-Fast Communication
Equipped with the CH343 UART controller, Makcu reaches transfer speeds up to 4 Mbps with virtually zero latency—ideal for tasks that demand high responsiveness.

Optimized for Speed and Precision
With full support for a 1000Hz polling rate, Makcu ensures ultra-fast input detection for precise control and low-lag performance.

Included in the Box

• 2× USB-A to USB-A Cables

• 1× Support Card

Makcu: Freedom, Power, and Precision in One Package

Open Source & Community-Driven
Makcu is fully open source, inviting developers and users alike to contribute, customize, and innovate together. It's built by the community, for the community.

Tailored Emulation
Makcu doesn’t just work—it adapts. With the ability to emulate your specific device setup, it ensures a personalized and flexible experience every time.

No Hardware Restrictions
Enjoy total control. Makcu places no limitations on your hardware, giving you the freedom to experiment and expand without constraints.

Built on ESP32-S3
Powered by the proven ESP32-S3 chip, Makcu delivers dependable performance and is built for long-term use in both hobbyist and professional projects.

Blazing-Fast Communication
Equipped with the CH343 UART controller, Makcu reaches transfer speeds up to 4 Mbps with virtually zero latency—ideal for tasks that demand high responsiveness.

Optimized for Speed and Precision
With full support for a 1000Hz polling rate, Makcu ensures ultra-fast input detection for precise control and low-lag performance.

Included in the Box

• 2× USB-A to USB-A Cables

• 1× Support Card

Package Includes:

• 75T DMA Board
• 6th Generation Fuser HDMI
• KMbox Net/ Makcu
• 1:1 cfg Basic Firmware for EAC/BE
• USB-C 3.2 Gen 2 to USB-A Cable

Key Features:

Effortless Updates

• The 2-in-1 USB-C port streamlines updates by handling both data and JTAG operations, eliminating the need for re-flashing.

Lightning-Fast Data Transfer

• Equipped with USB 3.2 Gen 2 technology, enjoy data transfer speeds of up to 200 MB/s.
• Powered by the FT601 USB3.2 Gen 2 to FIFO interface bridge chip, delivering up to 5Gbps bandwidth for optimal performance.

Advanced FPGA Technology

• Built with the Xilinx 7 Series Artix-7 75T FPGA, offering:
  • High performance-per-watt efficiency.
  • Superior transceiver line rates.
  • Enhanced DSP processing capabilities.
  • Refined AMS (Analog Mixed Signal) integration.
• Ideal for applications demanding higher logic density and advanced processing power.

USB-C JTAG Flashing

• On-board JTAG allows easy flashing of the DMA board via the USB-C Update Port, eliminating the need for cumbersome JTAG cables.

Stay Cool Under Pressure

• Comes with a built-in heat sink, ensuring the FPGA remains cool, preventing thermal throttling and extending the card's longevity.

User-Friendly Design

• On/Off Switch: Conveniently deactivate the card without physically disconnecting it from your PC.
• PCILeech Compatible: Features 64-bit memory access, PCIe TLP access, and compatibility with PCILeech for reading/writing to target system memory. (Note: Custom firmware is not included.)

Performance Highlights:

• USB-C 3.2 Gen 2 Connection: Seamless data transfer with speeds up to 300 MB/s read/write.
• DMA Reliability: Backed by a 3-month warranty covering defects in materials or workmanship under normal use and maintenance.
• DMA Firmware warrenty : Backed by a 7 - days testing warranty on Firmware.

Warranty Details:

• During the 1-month warranty period,  DMA BOARD  will repair or replace defective products or components at no charge.

Key Features

• Resolution and Refresh Rate Support:

  • Maximum: 3840x2160P at 60Hz
  • Backward Compatibility:
    • 2560x1440P at 144Hz
    • 1920x1080P at 240Hz
    • 3440x1440P at 100Hz
    • 2560x1080P at 200Hz
  • Wide compatibility with other resolutions and refresh rates.

• Plug-and-Play Simplicity:

  • No complex settings or adjustments required.
  • Lower latency than streaming and no lags during operation.

• Enhanced Perspective:

  • Works seamlessly with DMA to assist in achieving advanced visual perspectives without sacrificing frame rates.

• Durable and Reliable:

  • Shipped directly from the original factory.
  • Comes with a warranty card for peace of mind.

Best Pairing with DMA Cards

The Fusion works exceptionally well with DMA, a high-performance DMA solution introduced by Captain Corporation. Featuring XILINX FPGAs like the 35T and 75T chips, DMA offers:

• Stable and efficient data transfer.
• Compatibility with Fuser for optimal DMA acceleration.

This combination ensures high-performance results for data-intensive tasks such as network communication and graphic processing.

Shipping Information

• Ships within 1-3 business days via FedEx, DHL, or UPS for fast international delivery.

Setup Guide

Wiring Instructions:

1. Connect three HDMI transmission lines to:
   • Game Console
   • Radar Machine
   • Fusion Device

Secondary Machine Requirements:

• Processor: Intel i5 or equivalent
• RAM: 4GB
• Graphics Card: Not required; integrated graphics supported
• Performance: Minimum 4000 points

Interface Details:

• HDMI Output: Main display connection.
• HDMI1 Host: Connect to the host GPU.
• HDMI2 Secondary: Connect to the secondary machine GPU.
• Type-C Port: For program updates and EDID injection (used only during upgrades).
• DC 12V Port: Default 12V 2A power supply.

Important Note:
Do not directly connect the host GPU to the main monitor using a DP or HDMI cable. If connected, it must be unplugged.

Indicators and Buttons

Indicators:

• D1: Power Indicator (Always on when powered).
• D2: Fusion Function Indicator (On/Off).
• H2: HDMI2 Input Signal Indicator (On: Normal; Off: No signal).
• H1: HDMI1 Input Signal Indicator (On: Normal; Off: No signal).

Button Functions:

• Power Button: Turns the device on/off.
• K1 Button:
  • Short press: Cycle through resolutions:
    • 1920x1080
    • 2560x1440
    • 3840x2160
    • 2560x1080
    • 3440x1440
  • Long press (3 seconds): Display current resolution and refresh rate in the upper-left corner.
• K2 Button: Adjust upper-layer image matting intensity (21 levels from 0 to 20, default is 0).
• K3 Button: Reset matting strength to factory default (0).
• K4 Button: Toggle fusion function.

Troubleshooting Fusion Function:

1. Set the background color of the secondary unit to pure black.
2. Press the K2 button to enhance RGB values.

Additional Features:

• Plug-and-play operation.
• Automatic standby and memory storage.
• Temperature-controlled cooling for optimal performance.
• Original picture output with extremely low latency.

Important Upgrade Note:
If compatibility issues persist, upgrading via EDID injection may be required. Use the Type-C port to add an EDID and resolve compatibility problems.

Due to Limited Stock All dma card Shipment will be done from 7th or 8th july we will try to make it faster

Package Includes:

• 75T DMA Board
• USB-C 3.2 Gen 2 to USB-A Cable

Key Features:

Effortless Updates

• The 2-in-1 USB-C port streamlines updates by handling both data and JTAG operations, eliminating the need for re-flashing.

Lightning-Fast Data Transfer

• Equipped with USB 3.2 Gen 2 technology, enjoy data transfer speeds of up to 200 MB/s.
• Powered by the FT601 USB3.2 Gen 2 to FIFO interface bridge chip, delivering up to 5Gbps bandwidth for optimal performance.

Advanced FPGA Technology

• Built with the Xilinx 7 Series Artix-7 75T FPGA, offering:
  • High performance-per-watt efficiency.
  • Superior transceiver line rates.
  • Enhanced DSP processing capabilities.
  • Refined AMS (Analog Mixed Signal) integration.
• Ideal for applications demanding higher logic density and advanced processing power.

USB-C JTAG Flashing

• On-board JTAG allows easy flashing of the DMA board via the USB-C Update Port, eliminating the need for cumbersome JTAG cables.

Stay Cool Under Pressure

• Comes with a built-in heat sink, ensuring the FPGA remains cool, preventing thermal throttling and extending the card's longevity.

User-Friendly Design

• On/Off Switch: Conveniently deactivate the card without physically disconnecting it from your PC.
• PCILeech Compatible: Features 64-bit memory access, PCIe TLP access, and compatibility with PCILeech for reading/writing to target system memory. (Note: Custom firmware is not included.)

Performance Highlights:

• USB-C 3.2 Gen 2 Connection: Seamless data transfer with speeds up to 300 MB/s read/write.
• Phoenix DMA Reliability: Backed by a 3-month warranty covering defects in materials or workmanship under normal use and maintenance.

Warranty Details:

• During the 1-month warranty period,  DMA BOARD  will repair or replace defective products or components at no charge.

Package Includes:

• 75T DMA Board
• 6th Generation Fuser HDMI
• KMbox Net/ Makcu
• 1:1 cfg private Basic firmware for EAC/BE/VGK
• USB-C 3.2 Gen 2 to USB-A Cable

Key Features:

Effortless Updates

• The 2-in-1 USB-C port streamlines updates by handling both data and JTAG operations, eliminating the need for re-flashing.

Lightning-Fast Data Transfer

• Equipped with USB 3.2 Gen 2 technology, enjoy data transfer speeds of up to 200 MB/s.
• Powered by the FT601 USB3.2 Gen 2 to FIFO interface bridge chip, delivering up to 5Gbps bandwidth for optimal performance.

Advanced FPGA Technology

• Built with the Xilinx 7 Series Artix-7 75T FPGA, offering:
  • High performance-per-watt efficiency.
  • Superior transceiver line rates.
  • Enhanced DSP processing capabilities.
  • Refined AMS (Analog Mixed Signal) integration.
• Ideal for applications demanding higher logic density and advanced processing power.

USB-C JTAG Flashing

• On-board JTAG allows easy flashing of the DMA board via the USB-C Update Port, eliminating the need for cumbersome JTAG cables.

Stay Cool Under Pressure

• Comes with a built-in heat sink, ensuring the FPGA remains cool, preventing thermal throttling and extending the card's longevity.

User-Friendly Design

• On/Off Switch: Conveniently deactivate the card without physically disconnecting it from your PC.
• PCILeech Compatible: Features 64-bit memory access, PCIe TLP access, and compatibility with PCILeech for reading/writing to target system memory. (Note: Custom firmware is not included.)

Performance Highlights:

• USB-C 3.2 Gen 2 Connection: Seamless data transfer with speeds up to 300 MB/s read/write.
• DMA Reliability: Backed by a 3-month warranty covering defects in materials or workmanship under normal use and maintenance.
• DMA Firmware warrenty : Backed by a 7 - days testing warranty on Firmware.

Warranty Details:

• During the 1-month warranty period,  DMA BOARD  will repair or replace defective products or components at no charge.